Hard Surface Cleaning

 

Professional Tile and Grout Cleaner D456

This potent, low-foaming, high alkaline tile & grout cleaner is the first step for sparkling clean hard surface flooring such as man-made tile, grout, and some VCT, vinyl, cement, and natural stone surfaces. Industrial strength detergents and surfactants added for improved penetration and cleaning power. Simply dilute and spray onto soiled surfaces to loosen and break-down greasy, oily soils and dirt. Agitate with a grout brush and let dwell for 5-10 minutes for best results. Boost your solution with Prochem Kärcher Group Citrus Pro for even better cleaning results!

• Emulsifies Oils and Greases
• Removes Tough Soils, Hair and Body Oils, and Sweat
• Commercial and Residential Use

pH: 11.4 – 11.9 ready to use

Coverage: One gallon makes up to 8 gallons of ready to use solution for approximately 400 sf per diluted gallon.

Dilution:  16 to 32 oz. per 1 Gallon of Water

Available In: Gallons

 

Restoration Tile and Grout Cleaner D405

When normal cleaning procedures are not enough, then you have to get tough – and Prochem Kärcher Group’s Restoration Tile & Grout Cleaner will do the job! This industrial strength acid cleaner will remove embedded mineral deposits and carbonaceous soils such as rust, calcium, urine stains, soap scum, grout ‘haze’, and efflorescence from man-made tile and cement grout. Can be used to etch hard-to-clean grout by removing a super fine layer, leaving your grout sparkling bright and clean. Advanced formulation with premium chemistry and corrosion inhibitors. Not recommended for use on most natural stone.

• Removes Embedded Mineral Deposits and Carbonaceous Soils
• Low Foaming, Low VOC Formula
• Commercial and Residential Use

pH: <1.0 pH ready to use

Coverage: One gallon makes up to 17 gallons of ready to use solution for approximately 400 sf per diluted gallon.

Dilution:  8 – 32 oz. per 1 Gallon of Water

Available In: Gallon

 

Tile and Grout Rinse B464

Utilizing Tile & Grout Rinse as part of the 2-step cleaning system to neutralize and remove Prochem Kärcher Group’s heavy-duty tile and grout cleaners is a must – hot water just won’t cut through the emulsified soils and solvents to properly remove cleaning solution residues and embedded soils. This mild pH, low-foaming cleaning agent is formulated with strong detergents and surfactants, resulting in better penetration and cleaning of man-made tile and grout, VCT, vinyl, cement, brick, and most natural stone surfaces. Can also be used as a daily or maintenance cleaner for mopping or in a floor scrubber.

• Emulsifies Oils and Greases
• Neutralizes Alkaline and Acidic Cleaner Residues
• Economical – 1 Gallon Makes 65 Gallons

pH: 7.0 – 7.5 pH ready to use

Coverage: 1 gallon makes up to 65 gallons of ready to use solution for approximately 400 sf per diluted gallon.

Dilution Pump Sprayer or Bucket: 2 – 4 oz. per gallon of water

Dilution Portables: 2 oz. per 5 Gallons of Water

Dilution Truckmounts: 1 Quart per 5 Gallons of Water

Available In: Gallons

 

Ultrapac® Renovate A217

Formulated for fire damage and water damage restoration situations, Ultrapac Renovate is a highly concentrated, extreme cleaner for heavy soils and charged particle soils such as soot contamination. Designed for use on multiple surfaces, this cationic cleaning agent can be used on most painted and unpainted surfaces, drywall, metals, and other water-cleanable surfaces. Renovate contains no solvents that can damage many sensitive surfaces, and easily rinses without streaking.

• Removes Most Fingerprint Powder, Copier Toner, and Filtration Soil
• Highly Concentrated and Economical
• Powerful Enough for Industrial Cleaning and Restoration

pH: 10.5 – 11.0 ready to use

Coverage: 1 gallon makes up to 129 gallons of ready to use solution for approximately 400 sf per diluted gallon.

Dilution: 1 – 6 oz. per 1 Gallon of Water

Available In: Gallons

 

Water-Based Tile & Grout Sealer B462

With advanced fluoropolymer technology and a superior formulation, this professional penetrating sealer will effectively seal the surface and offer long-lasting protection for grout lines, tile, and porous stone. Designed specifically to penetrate deep into the surface to repel everyday soils, grease, and oils, as well as food spills and stains. Water-based and ready-to-use for fast and convenient application.

• Low VOC
• Easy Ready-to-Use Formula
• Commercial and Residential Use

pH: 7.9 – 8.4 pH ready to use

Coverage: One gallon protects approximately 300 – 400 square feet of porous grout.

Dilution: No Dilution Necessary

Available In: Gallons

 

Wide Range Cleaner D488

A multi-use cleaner for a wide variety of hard surfaces, Wide Range Cleaner is formulated with a restoration-strength blend of high alkaline, solvents and surfactants to cut through the toughest grease, oil, and grime on walls, countertops, and hard flooring surfaces such as tile, most natural stone, most brick and cement, VCT, and vinyl. Can be used for a variety of restoration cleaning jobs, from floors to most dishes!

• High pH for Superior Cleaning
• General-Purpose Cleaner for Most Hard Surfaces
• Powerful Enough for Commercial Cleaning and Restoration

pH: 11.4 – 11.8 ready to use

Coverage: One gallon makes up to 129 gallons of ready to use solution for approximately 400 sf per diluted gallon.

Dilution: 1 – 32 ounces per 1 Gallon Water

Available In: Gallons